Orthopedic U-Shaped Staple
Toothed & Non-Toothed 6 × 20 mm Configurations for Sports Medicine Procurement
Two Distinct Configurations in One Compact Staple Platform
The Orthopedic U-Shaped Staple series is supplied in two confirmed 6 × 20 mm configurations: a toothed MXDC version and a non-toothed MXDW version. Both products share a compact U-shaped profile with two tapered legs and stepped outer leg geometry. The toothed version adds two internal teeth beneath the bridge, while the non-toothed version keeps the inner bridge open. This visible structural distinction makes model identification straightforward for distributors and procurement teams. The source catalogue places the product within a sports medicine portfolio. Exact clinical indication, implant material, sterility status, surgical technique and associated instrumentation should be confirmed from the applicable product label, IFU and local registration documents before ordering or use.
Built Around Clear Selection and Procurement Identification
Toothed / Non-Toothed Choice
Two visually distinct configurations allow buyers to specify the required bridge structure without mixing product references.
Unified 6 × 20 mm Size
Both confirmed variants use the same 6 × 20 mm specification, making side-by-side comparison simple during product selection.
Tapered Dual-Leg Geometry
The supplied product image shows two tapered legs with stepped outer profiles, giving the staple a clearly defined implantation geometry.
Separate Ordering References
Each configuration has its own product code and model reference, supporting clearer quotation, order confirmation and documentation.
Identify the Required Structure at a Glance
Internal Tooth Detail
The MXDC version is distinguished by two internal teeth positioned beneath the bridge.
Leg Profile & Tapered Tip
Both supplied variants show a stepped outer leg profile and tapered distal points in the product image.
Confirmed Model Information
| Product Code | Configuration | Model / Size | Visible Structural Difference |
|---|---|---|---|
| 20306106 | Toothed U-Shaped Staple | MXDC 6 × 20 mm | Two internal teeth beneath the bridge |
| 20307106 | Non-Toothed U-Shaped Staple | MXDW 6 × 20 mm | Open inner bridge without central teeth |
Select by Configuration, Then Confirm the Registered Use
The source catalogue lists this product within its sports medicine solution portfolio.
Specify toothed MXDC or non-toothed MXDW before quotation and order confirmation.
Exact surgical use should follow the approved product label, IFU and local registration scope.
Confirm material, sterility, packaging and associated instruments according to the target market.
Information to Confirm Before Quotation
Toothed MXDC or non-toothed MXDW
20306106 or 20307106
Trial order, distributor stock or project quantity
Country, registration/document and labeling requirements
Procurement FAQ
1. What is the difference between MXDC and MXDW?
MXDC is the toothed configuration and includes two internal teeth beneath the bridge. MXDW is the non-toothed configuration with an open inner bridge.
2. What size is currently confirmed?
The supplied catalogue confirms 6 × 20 mm for both MXDC and MXDW.
3. What are the ordering codes?
The toothed MXDC 6 × 20 mm version is code 20306106. The non-toothed MXDW 6 × 20 mm version is code 20307106.
4. Is the product intended specifically for ACL or PCL reconstruction?
The supplied source identifies the product within a sports medicine catalogue but does not state a specific ACL, PCL or other surgical indication. Final use should follow the approved label, IFU and local registration scope.
5. What material is the staple made from?
Material is not stated in the currently supplied source. Please request the applicable technical specification or registration document before publication or ordering.
6. Is it sterile or single-use?
Sterility and reuse status are not confirmed in the current source. Follow the product label and IFU for the specific supplied version.
7. Are other sizes available?
Only 6 × 20 mm is confirmed by the supplied catalogue. Any other size should be treated as a separate request and confirmed before quotation.
8. What should I provide when requesting a quotation?
Please specify toothed or non-toothed configuration, product code, order quantity, destination market and any required registration, labeling or packaging documents.
Confirm the Correct Staple Configuration Before Ordering
Send us the required configuration, product code, quantity and target market. We can then confirm the available product documentation and quotation details for your project.
Hot Tags: orthopedic u-shaped staple, China orthopedic u-shaped staple manufacturers, suppliers, factory
